Making Connection Settings - Panasonic KX-VC500 Operating Manual

7.
Press [Home].
•
The Home screen is displayed.

Making Connection Settings

1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Use [ ][ ] to select "Call set up" and press
[Enter].
•
The connection settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
•
The following items are displayed over 2 pages.
To view all the items, press [R] to move to the
next page, and press [B] to move to the
previous page. You must save the settings
separately for each screen on which you
changed the settings.
"Answer Mode": Use [
answer video conference calls ("Manual" [default]
or "Auto") (Page 45).
"Max. Bandwidth": Press [Enter] and use [
[ ] to select the maximum allowed bandwidth to
be used (512 kbps, 768 kbps, 1.0 Mbps,
1.2 Mbps, 1.5 Mbps, 2.0 Mbps, 2.5 Mbps,
3.0 Mbps, 3.5 Mbps, 4.0 Mbps, 4.5 Mbps,
5.0 Mbps, 5.5 Mbps, 6.0 Mbps, 6.5 Mbps,
7.0 Mbps, 7.5 Mbps, 8.0 Mbps, 8.5 Mbps,
9.0 Mbps [default], 10.0 Mbps).
][ ] to select how to
]
Note
•
The maximum bandwidth during a video
conference call adjusts to that of the party
that has set the lowest bandwidth for the
maximum bandwidth setting among all
participating parties.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
•
When you make a 3-party video conference
call, select a value of "1.0 Mbps" or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
•
When you make a 4-party video conference
call, select a value of "1.5 Mbps" or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
"Encryption": Use [
enable encryption.
–
"ON": Encryption is enabled.
–
"OFF" (default): Encryption is disabled.
Note
•
Be careful when changing encryption
settings because doing so may cause you
to become unable to communicate with
other parties.
•
Be aware that if encryption is disabled,
eavesdropping might be possible on
networks that are not secured against such
actions.
•
If you cannot specify a value for
"Encryption" because the setting is
unavailable, contact your network
administrator.
•
When connecting to an MCU or
non-Panasonic video conference system,
set "Encryption" to "OFF" because
encryption is not available. Encryption must
be disabled on both sides.
"Video Quality": Use [
prioritising smooth movement or image quality for
video.
–
"Motion" (default): Prioritise smooth
movement.
–
"Sharpness": Prioritise image quality.
Note
•
If one of the other parties is using an older
software version, "Motion" will be selected.
•
If "Max Resolution" is set to "HD", and
"Video Quality" is changed from
"Motion" to "Sharpness", the setting for
Contacts and Settings
][ ] to select whether to
][ ] to select between
User Manual 85