Panasonic KX-VC500 Operating Manual page 66

Displaying Other Video Sources
•
Pressing [Full Screen] on the remote control will
hide or unhide the other party's information,
duration, and guide displays.
•
When connecting to another Panasonic HD Visual
Communication Unit:
–
–
–
•
When connecting to an MCU or non-Panasonic
video conference system:
–
–
–
2 Press [Camera Main] to return to showing the main video
camera's image.
Note
•
Only the party that pressed the [PC] button can perform
this operation.
66 User Manual
While displaying your computer's screen, the
other party cannot press [PC] to display their
own computer's screen.
If a sub video camera is connected, you can also
switch to the sub video camera's image by
pressing [Camera Sub] (Page 68). Only the
party that pressed [PC] can perform this
operation. To return to displaying your
computer's screen, press [PC].
While displaying your computer's screen, you
can switch to displaying the other party's image
in Layout 1 by pressing [B] (Page 47, Page 49,
Page 52). However, the other party cannot
perform this operation, and the other party
cannot confirm if you are viewing your
computer's screen or the other party's image.
When viewing the other party's image, the
screen layout is fixed to Layout 1. To return to
displaying your computer's screen, press [B].
Even while displaying your computer's screen, it
is also possible for the other party to start sharing
their computer's screen. In this case, note that
the other party's computer screen will be
displayed as the other party's image on your
screen.
If a sub video camera is connected, you can also
switch to the sub video camera's image by
pressing [Camera Sub] (Page 68). To return
to displaying your computer's screen, press
[PC]. It is also possible for the other party to start
sharing their sub video camera's image. In this
case, note that the other party's sub video
camera's image will be displayed as the other
party's image on your screen.
While displaying your computer's screen, you
can switch to displaying the other party's image
in Layout 1 by pressing [B] (Page 47). To return
to displaying your computer's screen, press [R].