Panasonic KX-VC500 Operating Manual page 26

Preparation
4 m
Microphone
4 m
Microphone
Microphone
Microphone
4 m
Microphone Microphone
4 m
Microphone Microphone
26 User Manual
Display
4 m
Microphone
Display
4 m
4 m
4 m
Display
4 m
Amplifier/Active Speaker
Connection
This section describes how to connect an amplifier/
active speaker.
1.
Connect the amplifier/active speaker to the Audio
Out L/R jack on the back of the unit using a stereo
pin plug cable.
Note
•
Connect the amplifier/active speaker
correctly, as follows:
– Left channel ® L
– Right channel ® R
•
For more details about the amplifier or
active speaker, refer to the documentation
for the corresponding device.
Layout example:
Place the speakers either side of the display, as follows:
Microphone
Notice
•
Place the speakers either side of the display. If
you place the display at the front of the room
and the speakers at the back, the microphone's
left/right spatial direction may be reversed, and
the orientation of the image and sound will not
match on the other party's side.
Speaker
Display
Main
video
camera
Speaker