Panasonic KX-VC500 Operating Manual page 82

Contacts and Settings
3.
Use [ ][ ] to select the single-party entry you
want to add as a contact, and press [B].
•
The contact list registration screen is displayed.
4.
Use [ ][ ] to select the necessary items and
input information (Page 110).
Note
•
You cannot edit "Multi-Point" or
"Address".
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The outgoing or incoming call history screen is
displayed, depending on which of the screens
you displayed in step 2.
7.
Press [Home].
•
The Home screen is displayed.
Registering a Multiple-party Contact
You can register a multiple-party contact to the contact
list from the outgoing call history.
Note
•
When you register a multiple-party contact to
the contact list from the call history, each party
is also registered automatically as a
single-party contact and each IP address/SIP
URI (or SIP user name) is registered in "Group/
Site".
82 User Manual
•
If a host name is displayed in the "Site" column
of the call history, the party cannot be registered
in your contact list.
•
Also, you may not be able to register a SIP URI
(or SIP user name) from the incoming call
history to the contact list for a reason such as
non-compliance with the RFC. In this case,
contact your network administrator.
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Call History" and press
[Enter].
•
The outgoing call history screen is displayed.
3.
Use [ ][ ] to select the multiple-party entry you
want to add as a multiple-party contact, and press
[B].
•
The contact list registration screen is displayed.
4.
Use [ ][ ] to select the necessary items and
input information (Page 110).
Note
•
You cannot edit "Multi-Point" or
"Address".
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The call history screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.