Panasonic KX-VC500 Operating Manual page 40

Starting a Video Conference
6 Enter the IP address, SIP URI (or SIP user name), or MCU's
conference room number@IP address.
Note
•
If the IP address contains 1 or 2 digit numbers, enter
these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
To initiate a video conference call by entering a SIP
URI (SIP user name@SIP domain name), you must
set "SIP Server" to "ON" and specify "SIP Server
Address", "SIP Username", and "SIP Domain
Name". Also, specify "Digest Authentication",
"Authentication ID", and "Authentication
Password" as necessary (Page 99). For details,
contact your network administrator.
•
When making a video conference call within your own
SIP domain, you can make the call by entering the
other party's SIP user name. When the other party is
not within your SIP domain, you must also include
their SIP domain name in addition to their SIP user
name.
When a SIP domain name is not specified, your own
SIP domain name is automatically appended to the
address and the call is made. Be careful as this may
result in calling the wrong party.
•
The characters that can be input for SIP URI entry
are as follows:
SIP user name: alphanumeric characters, symbols .
= * + _ - $
SIP domain name: alphanumeric characters,
symbols . - (up to 128 characters)
Enter an RFC-compliant value. For details, contact
your network administrator.
•
To initiate a video conference call by entering an
MCU's conference room number@IP address, "SIP
Server" must be set to "OFF" (Page 99).
•
The characters that can be input for an MCU's
conference room number are as follows:
Alphanumeric characters, symbols . = * + _ - $
' ( ) (up to 60 characters)
40 User Manual
! ? / ' ( ) (up to 60 characters)
! ? /