Cluster Map View; Monitoring Cluster Usage; Editing A Cluster; Editing Cluster Properties - HP StoreVirtual 4000 User Manual

8. (Optional) Enter information for creating the first volume in the cluster, or select Skip Volume
Creation.
NOTE:
size of the cluster once it is created can vary. Therefore, you may notice that, after creating
a cluster and viewing the Details tab of the cluster, the size listed in the Total Available Space
box is different. However, the size in the Total Available Space box is accurate.
9. Click Finish.
10. Review the summary information in the next window. Click Close when finished.
Adding an iSNS server (option)
NOTE: If you are using an iSNS server, you may not need to add Target Portals in the Microsoft
iSCSI Initiator.
1. Select the new cluster in the navigation window. Click iSCSI Tasks menu, and select Add iSNS
Server.
2. Right-click on the cluster or click Cluster Tasks and select Edit Cluster.
3. Select Edit Cluster Edit iSNS Servers.
4. In the Edit iSNS Server window, click Add Server.
5. Enter the IP address of the iSNS server.
6. Click OK.
7. Click OK when finished.

Cluster Map View

After creating clusters and volumes and finishing the setup of HP LeftHand Storage, use the Map
View tab for viewing the relationships between clusters, sites, volumes and systems. For more
information on using the map view tools, see

Monitoring cluster usage

The Use Summary, Volume Use, and System Use tabs provide detailed information about
provisioning of volumes and snapshots and space usage in the cluster. See
management" (page 148)

Editing a cluster

Editing cluster properties

Change the cluster name or description.
1. Right-click the cluster or click Cluster Tasks.
2. Select Edit Cluster Edit Cluster Properties.
3. In the Edit Cluster Properties window change the name, or add or change the cluster description.
4. Click OK to save.

Editing iSNS servers

Add or change the iSNS servers for a cluster. If you change the IP address of an iSNS server, or
remove the server, you may need to change the configuration that clients are using. Therefore,
you may need to disconnect any clients before making this change.
The size listed in the Cluster Available Space box is an estimate because the actual
for information about the information reported on these tabs.
"Using the display tools" (page 17).
"Ongoing capacity
Monitoring cluster usage 133