Prerequisites For Application-Managed Snapshots - HP StoreVirtual 4000 User Manual

Table 51 Snapshot characteristics (continued)
Snapshot parameter

Prerequisites for application-managed snapshots

Creating an application-managed snapshot using the SAN/iQ software is the same as creating
any other snapshot. However, you must select the Application-Managed Snapshot option in the
New Snapshot window. You can create application-managed snapshots for both single and
scheduled snapshots. See the HP LeftHand Storage Application Aware Snapshot Manager
Deployment Guide for server-side requirements for installing and configuring the Application Aware
Snapshot Manager.
The following are required for application-managed snapshots:
Table 52 Prerequisites for application-managed snapshots
All
CMC or CLI latest update
HP LeftHand Application
Integration Solution Pack,
specifically the HP LeftHand
Application Aware Snapshot
Manager (latest update) installed
on the application server (See the
HP LeftHand Storage Application
Aware Snapshot Manager
Deployment Guide)
Management group authentication
set up for the Application Aware
Snapshot Manager (see the HP
LeftHand Storage Application
Aware Snapshot Manager
Deployment Guide)
Application on the server that is
can be quiesced
Server configured with iSCSI
connection (see
access to volumes" (page
Application-managed snapshots for volume sets
When you create an application-managed snapshot of a volume in a volume set, the software
recognizes that the volume is part of a volume set, and prompts you to create a snapshot for each
volume in the volume set. The result is a snapshot set that corresponds to the volume set. To see
any associated snapshots, select a snapshot, click the Details tab, and look at the Snapshot Set
field.
NOTE: After you create snapshots for a volume set, typically you do not want to delete individual
snapshots from the snapshot set. You want to keep or delete all snapshots for the volume set. If
you need to roll back to a snapshot, typically you want to roll back each volume in the volume set
to its corresponding snapshot. The system gives you the option to automatically delete or roll back
all associated volumes.
164 Using snapshots
Windows
SAN/iQ software 8.5 or later for
Windows application-managed
snapshots
Microsoft iSCSI initiator
"Controlling server
197))
What it means
vCenter Server is installed. See the HP LeftHand Storage
Application Aware Snapshot Manager Deployment Guide
for more information about the controlling server IP address.
VMware
SAN/iQ software 9.5 or later for
VMware application-managed
snapshots
CMC Server configured with iSCSI
connection that must use the IP
address of the vCenter Server as the
Controlling Server IP address
ESX Server software iSCSI initiator