20 Using The Configuration Interface; Connecting To The Configuration Interface; Establishing A Terminal Emulation Session On A Windows System; Establishing A Terminal Emulation Session On A Linux/Unix System - HP StoreVirtual 4000 User Manual

20 Using the Configuration Interface

The Configuration Interface is the command line interface that uses a direct connection with the
storage system.
You may need to access the Configuration Interface if all network connections to the storage system
are disabled. Use the Configuration Interface to perform the following tasks.
Add storage system administrators and change passwords
Access and configure network interfaces
Delete a NIC bond
Set the TCP speed and duplex, or edit the frame size
Remove the storage system from a management group
Reset the storage system configuration to factory defaults

Connecting to the Configuration Interface

Accessing the Configuration Interface is accomplished by
Attaching a keyboard and monitor (KVM) to the storage system serial port (preferred) or
Attaching a PC or a laptop using a null modem cable and connecting to the Configuration
Interface with a terminal emulation program.

Establishing a terminal emulation session on a Windows system

On the PC or laptop attached directly to the storage system with a null modem cable, open a
session with a terminal emulation program such as HyperTerminal or ProComm Plus.
Use the following settings: 19200, 8-N- 1
When the session is established, the Configuration Interface window opens.

Establishing a terminal emulation session on a Linux/UNIX system

If using Linux, create the following configuration file. You must create the file as root, or root must
change permissions for /dev/cua0 in order to create the config file in /etc/.
1. Create the /etc/minirc.NSM with the following parameters:
# Begin HP LeftHand Networks NSM configuration
# Machine-generated file
# change parameters
pr port = /dev/cua0
pu baudrate = 19200
pu bits = 8
pu parity = N
pu stopbits = 1
pu mautobaud = Yes
pu backspace = DEL
pu hasdcd = No
pu rtscts = No
pu xonxoff = Yes
pu askdndir = Yes
# End HP LeftHand Networks NSM configuration
2. Start xterm as follows:
use "minicom s" to
Connecting to the Configuration Interface 239