HP StoreVirtual 4000 User Manual page 251

4. Remove the top cover
a. Loosen the screw on the top cover with the T- 1 0 wrench.
b. Press the latch on the top cover.
c. Slide the cover toward the rear of the server and then lift the top cover to remove it from
the chassis. Lift the top cover away from the chassis.
Figure 1 15 Removing the cover
5. Locate and remove the PCI cage:
a. Loosen the thumbscrews that secure the PCI cage to the system board and remove the
screw that secures the PCI cage to the rear of the server (1,
b. Lift the PCI cage away from the system board (2,
Figure 1 16 Removing the PCI cage
(Figure 1 15 (page 251)):
Figure 1 16 (page
Figure 1 16 (page 251)).
Replacing the RAID controller 251
251)).