Reordering Storage Systems In A Cluster; Exchange A Storage System In A Cluster; Removing A Storage System From A Cluster - HP StoreVirtual 4000 User Manual

10.0 hp lefthand storage user guide (ax696-96202, november 2012)
Hide thumbs Also See for StoreVirtual 4000:
Table of Contents

Advertisement

Figure 54 Swapping storage systems in the cluster
6.
Repeat the process for each storage system to be swapped.
7.
Click Swap Storage Systems when you are finished.
The swap operation may take some time, depending upon the number of storage systems swapped
and the amount of data being restriped.

Reordering storage systems in a cluster

Reorder the systems in a cluster to control the stripe patterns, especially in a multi-site cluster.
1.
Select the cluster in the navigation window.
2.
Click Cluster Tasks, and select Edit Cluster Reorder Storage Systems.
3.
In the Reorder Storage Systems window, select a storage system and click the up or down
arrow to move it to the desired position.
4.
Click OK when the storage systems are in the desired order.

Exchange a storage system in a cluster

Use the Exchange storage system feature when you are ready to return a repaired storage system
to the cluster. Exchanging a storage system is preferred to adding the repaired storage system to
the cluster. Exchanging the storage system requires only a resyncronization of the data in the
cluster, rather than a restripe, which minimizes the time required to bring the cluster back to full
operation. See
1.
Select the cluster in the navigation window.
2.
Click Cluster Tasks, and select Edit Cluster Exchange Storage Systems.
3.
In the Exchange Cluster Storage Systems window, select the storage system to remove and
click Exchange Storage Systems.
4.
Select the storage system to exchange in the Exchange Storage System window and click OK.
5.
Click OK to complete the exchange.

Removing a storage system from a cluster

You can remove a storage system from a cluster only if the cluster contains sufficient storage systems
to maintain the existing volumes and their data protection level. See
(page 156)
for more information about editing volumes.
136 Working with clusters
"Repairing a storage system" (page
138).
"Characteristics of volumes"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lefthand storage

Table of Contents