HP StoreVirtual 4000 User Manual page 66

Figure 35 Searching for the unbonded storage system on the network
5. Search for the storage system by Host Name or IP Address or Subnet/Mask.
NOTE:
the search may fail the first time. If the search fails, wait a minute or two and select Try Again
on the Network Search Failed message.
You can also use the Configuration Interface to delete a NIC bond. See
bond" (page
Verify NIC settings and communication settings after deleting a bond
1. Select a storage system, and open the tree below it.
2. Select Network.
3. Check the interfaces on the TCP/IP tab, and reconfigure them if necessary.
After deleting a bond, the interfaces may not have the correct IP addresses, or one interface
may be disabled.
4. Click the Communication tab.
66 Managing the network
Because it can take a few minutes for the storage system to set the network address,
241).
"Deleting a NIC