Using The Snmp Mibs - HP StoreVirtual 4000 User Manual

10.0 hp lefthand storage user guide (ax696-96202, november 2012)
Hide thumbs Also See for StoreVirtual 4000:
Table of Contents

Advertisement

6.
Clear the selected severities checkboxes.
7.
Click OK to confirm.

Using the SNMP MIBs

The LeftHand Networks MIBs provide read-only access to the storage system. The SNMP
implementation in the storage system supports MIB-II compliant objects.
These files, when loaded in the SNMP client, allow you to see storage system-specific information
such as model number, serial number, hard disk capacity, network characteristics, RAID
configuration, DNS server configuration details, and more.
NOTE:
With version 8.5 or later, traps no longer all use a single OID. The
LEFTHAND-NETWORKS-NOTIFICATION-MIB defines the OIDs now in use.
Installing the LeftHand Networks MIB
The complete set of standard SNMP MIB files and the LeftHand Networks MIB files may be installed
from the HP LeftHand Management Software DVD. The installer places the MIBs in the following
directory by default: C:\Program Files\HP\P4000\UI\mibs. Your SNMP client may require
that you copy the MIBs to another location, or you may need to copy them to the system where
your SNMP client is installed.
On the system where your SNMP client is installed, load the LeftHand Networks MIBs as outlined
below, using the SNMP client. The complete set of standard SNMP MIBs must also be loaded.
Load the MIBs as follows:
1.
If you do not have the standard SNMP MIBs loaded, load them.
2.
If you do not have HCNUM-TC.MIB loaded, load it.
3.
Load LEFTHAND-NETWORKS-GLOBAL-REG-MIB.
4.
Load LEFTHAND-NETWORKS-NSM-MIB.
5.
The following MIB files can be loaded in any sequence.
LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB
LEFTHAND-NETWORKS-NSM-DNS-MIB
LEFTHAND-NETWORKS-NSM-INFO-MIB
LEFTHAND-NETWORKS-NSM-NETWORK-MIB
LEFTHAND-NETWORKS-NSM-NOTIFICATION-MIB
LEFTHAND-NETWORKS-NSM-NTP-MIB
LEFTHAND-NETWORKS-NSM-SECURITY-MIB
LEFTHAND-NETWORKS-NSM-STATUS-MIB
LEFTHAND-NETWORKS-NSM-STORAGE-MIB
Supported MIBs
The following are the supported standard MIBs, though not every function in each MIB is supported.
DISMAN-EVENT-MIB
HOST-RESOURCES-MIB
IF-MIB
IP-FORWARD-MIB
IP-MIB
NET-SNMP-AGENT-MIB
NET-SNMP-EXTEND-MIB
Configuring SNMP
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lefthand storage

Table of Contents