Naming Smartclone Volumes - HP StoreVirtual 4000 User Manual

Table 56 Characteristics for new SmartClone volumes (continued)
SmartClone volume characteristic
Permission

Naming SmartClone volumes

Because you may create dozens or even hundreds of SmartClone volumes, you need to plan the
naming convention for them. For information about the default naming conventions built into the
SAN/iQ software, see
When you create a SmartClone volume, you can designate the base name for the volume. This
base name is then used with numbers appended, incrementing to the total number of SmartClone
volumes you create. For example,
name of "C#" and 10 clones. (The number in parentheses indicates how many snapshots are
under that volume.)
Figure 70 Example of using a base name with 10 SmartClone volumes
After you designate a base name for the SmartClone volumes while you are creating them, you
can then edit individual names of SmartClone volumes in the table list, before you finish creating
them.
NOTE: Rename the SmartClone volume at the bottom of the list. Then the numbering sequence
is not disrupted.
182 SmartClone volumes
"Setting naming conventions" (page
Figure 70 (page 182)
What it means
more information, see "Assigning iSCSI server connections
access to volumes" (page 205).
Type of access to the volume: Read, Read/Write, None
18).
shows a SmartClone volume with the base