Copying Events To The Clipboard; Exporting Event Data To A .Csv Or .Txt File; Configuring Email Notification; Configuring The Email Server - HP StoreVirtual 4000 User Manual

6. Optional: To paste the event details into a document or email message, click Copy to copy
the details to the clipboard.
7. Click Close to finish.

Copying events to the clipboard

1. In the navigation window, log in to the management group.
2. Select Events in the tree.
3. Do one of the following:
Select one or more events, click Event Tasks, and select Copy Selected to Clipboard.
Click Event Tasks, and select Copy All to Clipboard.

Exporting event data to a .csv or .txt file

1. In the navigation window, log in to the management group.
2. Select Events in the tree.
3. Click Event Tasks, and select Export Events.
4. In the Filename field, enter a path and file name.
If you enter just a file name, the file is stored in the directory in which the CMC is installed.
To select a different location or .txt format, click Browse.
5. Click OK to finish the export.

Configuring email notification

Configure the following for email notifications of alarms and events:
"Configuring the email server" (page 90)
"Configuring email recipients" (page 91)
IMPORTANT:
emails will be blocked. See a list of ports used in HP LeftHand Storage in
port usage" (page
NOTE: Until email is fully configured, you will not receive notifications. Therefore, some
notifications may not be received while the management group is being configured.

Configuring the email server

When you configure a management group, you configure email notification for alarms and events
by configuring the email server to send messages and then adding email recipients to receive
messages based on severity. Update these settings later, if necessary, using the Email Tasks button
in the Events window for the management group.
NOTE: Ensure that you configure email notification for each management group.
1. In the navigation window, log in to the management group.
2. In the tree, select Events Email.
3. Click Email Tasks, and select Edit Email Settings.
4. In the Server IP/Hostname field, enter the IP address or host name of your email (SMTP) server.
5. In the Server Port field, enter the email port.
The standard port is 25.
90 Monitoring the SAN
If a firewall is configured and blocks the network port used for sending email alerts,
255).
"SAN/iQ TCP and UDP