22 San/Iq Tcp And Udp Port Usage - HP StoreVirtual 4000 User Manual

22 SAN/iQ TCP and UDP port usage

Table 77 (page 255)
"management applications" listed in the Description column include the HP LeftHand Centralized
Management Consoleand the scripting interface.
Table 77 TCP/UDP ports used for normal SAN operations with SAN/iQ
IP Protocol
TCP
TCP
TCP, UDP
TCP, UDP
UDP
UDP
UDP
TCP, UDP
TCP
UDP
TCP
TCP, UDP
TCP
TCP
lists the TCP and UDP ports that enable communication with SAN/iQ. The
Port(s)
22
25
53
67, 68
123
161, 162
514
3205
3260
8453, 8454, 8455
1 1 120
13838, 13841, 13843
13840, 13850, 13851
13846, 13850, 13946,
13847
Name
SSH
SMTP
DNS
bootps
NTP
SNMP
Syslog
iSNS
iSCSI
SAN/iQ Internal
SAN/iQ Upgrade
SAN/iQ Internal
SAN/iQ Internal
SAN/iQ Support
Description
Secure Shell access for
SAN/iQ Support only. Not
required for normal
day-to-day operations.
Outgoing from storage
systems for email based
alerts.
Outgoing from storage
systems for hostname
resolution.
Used only if DHCP is
enabled.
Outgoing from storage
systems for time
synchronization.
SNMP Agent on the storage
system. Incoming from
SNMP clients. Outgoing
from the storage systems for
SNMP Traps.
Outgoing from the storage
systems for remote logging.
Outgoing from the storage
systems for iSNS services
iSCSI initiators connect on
this port.
Used for internal SAN/iQ
discovery.
Incoming to storage systems.
Used for upgrading the
storage systems. Not
required for normal
day-to-day operations.
Outgoing from management
applications. Incoming to
storage systems. Used for
management and control.
Outgoing from management
applications. Incoming to
storage systems. Used for
management and control.
Trace Ports for SAN/iQ
Support only. Not required
for normal day-to-day
operations.
255