Making A Windows Application-Managed Snapshot Available - HP StoreVirtual 4000 User Manual

3. Configure server access to the snapshot
4. If you mount a Windows application-managed snapshot as a volume, use diskpart.exe
to change the resulting volume's attributes, as described in
application-managed snapshot available" (page
When you have mounted the snapshot on a host, you can do the following:
Recover individual files or folders and restore to an alternate location
Use the data for creating backups

Making a Windows application-managed snapshot available

If you do any of the following using a Windows application-managed snapshot, you must use
diskpart.exe to make the resulting volume available:
Convert temporary space
Create a SmartClone
Promote a remote volume to a primary volume
◦
Failover/Failback Volume Wizard and selecting the "Failover the Primary Volume to the
Selected Remote Volume Below" option
◦
Edit Volume and changing a remote snapshot to a primary volume
Making a Windows application-managed snapshot available on a stand-alone server
Use this procedure to make a Windows application-managed snapshot available on a stand-alone
server (not part of a Microsoft cluster).
1. Disconnect the iSCSI sessions.
2. Do one of the following (based on what you want to do with the application-managed
snapshot):
Convert temporary space.
Create a SmartClone.
Promote a remote volume to a primary volume using:
◦
◦
3. Connect the iSCSI sessions to the new target volume.
4. Launch Windows Logical Disk Manager.
5. Bring the disk online.
6. Open a Windows command line and run diskpart.exe.
7. List the disks that appear to this server by typing the command list disk.
8. Select the disk you are working with by typing select disk # (where # is the corresponding
number of the disk in the list).
9. Display the options set at the disk level by typing detail disk.
If the disk is listed as read-only, change it by typing att disk clear readonly.
10. Select the volume you are working with by typing select volume # (where # is the
corresponding number of the volume in the list).
1 1. Display the volume's attributes by typing att vol.
The volume will show that it is hidden, read-only, and shadow copy.
12. Change these attributes by typing att vol clear readonly hidden shadowcopy.
Failover/Failback Volume Wizard and selecting the "Failover the Primary Volume
to the Selected Remote Volume Below" option.
Edit Volume and changing a remote snapshot to a primary volume.
"Making a Windows
171).
Mounting a snapshot 171