Deleting A Manually Configured Fibre Channel Initiator; Editing A Fibre Channel Server Connection; Deleting A Fibre Channel Server Connection; Completing The Fibre Channel Setup - HP StoreVirtual 4000 User Manual

3. In the New Server window on the iSCSI tab, clear Allow access via iSCSI.
4. Click the Fibre Channel tab.
5. Enter a name and optional description for the server connection.
6. If you are taking VMware application-managed snapshots, enter the Controlling Server IP
Address.
7. Click Manually Configure Initiator.
8. Enter the initiator WWPN in the dialog box, and click Save to add the WWPN to the list of
unassigned WWPNs.
9. Select this WWPN in the Unassigned Initiator list and click Assign.
10. Click OK when you are finished.

Deleting a manually configured Fibre Channel initiator

You can delete a manually configured Fibre Channel initiator from either the unassigned or assigned
initiator list.
1. In the navigation window, select the Fibre Channel server connection you want to edit.
2. Click the Details tab.
3. Click Server Tasks, and select Edit Server.
4. Select the manually configured initiator WWPN from the list. The Delete button becomes
enabled.
5. Click Delete, and then click OK to confirm.
6. Click OK when you are finished.

Editing a Fibre Channel server connection

Edit the following items for a Fibre Channel server connection:
Description
Controlling server IP address
Initiator WWPN assignments
1. In the navigation window, select the Fibre Channel server connection you want to edit.
2. Click the Details tab.
3. Click Server Tasks, and select Edit Server.
4. Change the appropriate information.
5. Click OK when you are finished.
6. If you have changed the Initiator WWPN assignments, ensure that you update the LUN
assignments as well.

Deleting a Fibre Channel server connection

Deleting a Fibre Channel server connection stops access to volumes by servers using that server
connection. Access to the same volume by other servers continues.
1. In the navigation window, select the Fibre Channel server connection you want to delete.
2. Click the Details tab.
3. Click Server Tasks, and select Delete Server.
4. Click OK to delete the server.

Completing the Fibre Channel setup

Rescanning the disks
In the disk management tool, rescan the Fibre Channel disks to show the LUNs you just configured.
You will see an individual disk for every path, for each LUN, until you configure MPIO.
202 Controlling server access to volumes