Scanner Arm Removal - Lexmark X500n Service Manual

7100-XXX

Scanner arm removal

1. Remove the flatbed assembly. See
2. Remove the screw (A) securing the scanner armlock to the printer top cover.
3. Tilt the top of the scanner arm to the center of the MFP, and remove the armlock (B).
Note: Save the armlock for the new scanner arm.
4. Continue tilting the scanner arm, and pull the arm outward and up.
5. Lift the scanner arm up and away from the printer top cover.
4-52
Service Manual
"Flatbed assembly removal" on page
A
B
4-49.