Lexmark X500n Service Manual page 27

Print engine paper and media specifications
Print area
The printable area is up to 4.0 mm (0.158 in) from the top and bottom of the media, and up to 3.0 mm
(0.118 in) from the left and right edges. Any information placed outside this specified printable area will not
print. For envelopes, the printable area is up to 4.0 mm (0.158 in) of the left and right edges, and 3.0 mm
(0.118 in) of the top and bottom edges.
Print engine input and output configurations
The following table shows the standard number of input sources and output destinations, as well as the
estimated capacity of each. Capacity may vary and is subject to media specifications and MFP operating
environment. The capacities listed are based on plain paper at 75 g/m
Sources and capacities
Number of standard sources
Number of optional input drawers
Maximum number of input sources
Maximum input capacity
Standard input
Primary tray capacity
Total standard capacity
Optional input
Optional tray 1 capacity
Optional tray 2 capacity
Number of standard destinations
Output capacities
Standard output bin capacity (top)
Media up to 20 lb paper
1
Optional input drawer is a 530-sheet capacity drawer. Only one optional drawer may be installed at any time.
2
The MFP supports top output (facedown) as standard. No additional output options are available.
Note: All capacities are based on use of 20 lb paper.
Input sources
1
Input capacities
Output destinations
2
.
2
7100-XXX
X500n / X502n
1
1
2
780
250
250
250
530
1
250
1-7
General information