Print Engine Specifications - Lexmark X500n Service Manual

7100-XXX

Print engine specifications

Print engine resolution
600 x 600 dpi, 1200 x 600 dpi
Color balance settings
This MFP offers color balance control. It is a color correction option that allows you to increase or decrease
the amount of toner going to the page for all four color planes. The scale ranges from -10 to +10.
Emulations
Raster Graphics (CMYK bi-tone JBIG Compressed)
Print engine speed and performance
Pages/minute)
Media size Standard tray
Mono
Letter Up to 31
A4 Up to 31
Legal Up to 16
Transparencies Up to 3
Thick card stock Up to 3
Labels (letter & Up to 5
A4)
Medium thick card Up to 4
stock (letter & A4)
Envelopes Up to 5
Print engine time to first print
Media type/Media size
Plain paper mode / A4, letter
Transparency mode / A4, letter
Label–middle thickness stock / A4, letter
Middle thick stock–glossy / A4, letter
Thick stock / A4, letter
Envelope (1) mode / Commercial #10, International DL
Envelope (2) mode / Commercial #10, International DL
Note: Note: Time to first page (TTFP) is the time from the moment when the host sends the print signal
until the moment the trailing edge of the first page leaves the exit feed rollers. TTFP is measured using a
simple text (single character) page.
Note: Note: Warm up time, 60 seconds maximum, is the time elapsed from when the power is turned on
to when the Ready status is reached.
1-6
Service Manual
Color
Up to 8
Up to 8
Up to 8
Up to 2
Up to 2
Up to 3
Up to 3
Up to 3
First print time
Mono
13 seconds
23 seconds
17 seconds
16 seconds
23 seconds
18 seconds
23 seconds
Color
19 seconds
29 seconds
23 seconds
22 seconds
29 seconds
24 seconds
29 seconds