Lexmark X500n Service Manual page 47

Message
Toner Error
install Supported Cartridge
Missing
install Toner (C,M,Y,K)
Missing
install OPC Belt
Missing
install Transfer Roller
Paper Jam A 1-2
Paper Jam B
Paper Jam C
Cover Open
Close (Front, Rear, OPC)
TR Belt Life
Replace Transfer Belt
TR Kit Life
Replace PQ Kit
PF1 Kit Life
Replace PF Kit 1
PF2 Kit Life
Replace PF Kit 2
ADF Jam
Open ADF cover and Clear Jam
ADF Cover Open
Close ADF cover
Scan Calibration Error
Scan Lock Error
Unlock Scanner
Description
An invalid toner cartridge
is installed.
A toner cartridge is not
keyed properly.
The OPC belt cartridge is
not installed.
The transfer roller is not
installed.
Paper is jamming at
feeding area.
Paper is jamming inside
the MFP.
Paper is jamming at paper
exit area.
The back, front, or OPC
cover is open.
The transfer belt is at its
end of life.
The transfer roll and
transfer belt cleaning roll
have reached the end of
life.
The paperfeed roll and
separator pad in tray 1 are
at the end of life.
The paperfeed roll and
separator pad in tray 2 are
at the end of life.
A sheet of paper is
jammed in the ADF.
The ADF cover is open.
Scanner is out of
calibration.
The scanner lock is in the
locked position.
Action
install a supported cartridge. If the problem
persists, see "Missing toner cartridge service
check" on page 2-32.
install proper brand of toner cartridge. If problem
persists, see "Missing toner cartridge service
check" on page 2-32.
Correctly install the photodeveloper cartridge to
clear message and continue printing. If error
persists, see "Missing photodeveloper
cartridge service check" on page
Ensure transfer roller is properly installed. If
problem persists, see "Transfer roller missing
service check" on page 2-34.
See "Paper Jam A1, rear (tray 1)" on page 3-24
or "Paper Jam A2, rear (tray 2)" on page 3-26
for instructions to clear the jam.
See "Paper Jam B rear" on page 3-27
instructions to clear the jam.
See "Paper Jam C rear" on page 3-29
instructions to clear the jam.
Close specified cover if open. If not open, open
the cover and close. If the problem persists, see
"Cover open service check" on page
Replace the transfer belt. See
unit removal" on page 4-5.
Replace the transfer roll. See
removal" on page 4-6. Also, replace the transfer
belt cleaning roller. See "Transfer belt cleaning
roller removal" on page 4-4.
Replace the paperfeed roll and the separator pad
for the respective paper tray (1 or 2). See
feed roller removal" on page
Clear the ADF jam. If the message persists, see
"ADF streak service check" on page
Close the ADF cover. If the cover is already
closed, see "ADF streak service check" on
page 2-41.
Perform scanner calibration.
Unlock the scanner. If the scanner lock is in the
unlocked position, see "Flatbed service check"
on page 2-41.
7100-XXX
2-33.
for
for
2-35.
"Transfer belt
"Transfer roller
"Paper
4-32.
2-41.
2-9
Diagnostic information