Configuring Irmc S2/S3 Using The Server Configuration Manager - Fujitsu Remote Management User Manual

9 Configuring iRMC S2/S3 using
the Server Configuration
Manager
You can use the Server Configuration Manager to
– configure the iRMC S2/S3,
– configure and manage user IDs at the iRMC S2/S3,
– configure a directory service on the iRMC S2/S3,
– configure the CAS service on the iRMC S2/S3.
I
Requirements:
The current ServerView agents must be installed on the managed server.
The Server Configuration Manager functions can be accessed in the following
ways:
– Locally on managed servers using the ServerView Installation Manager.
– Locally on managed Windows-based servers using the Windows Start
menu.
I
This is only supported for servers on which the ServerView agents for
Windows are installed.
– On the remote workstation using the graphical interface of the Operations
Manager.
I
This is only supported for servers on which the ServerView agents for
Windows are installed.
This chapter in detail describes the various ways to call the Server Configuration
Manager.
I
For details on the Configuration Manager dialog pages, please refer to
the online help of the Server Configuration Manager.
iRMC S2/S3
347