Sensors - Check Status Of The Sensors - Fujitsu Remote Management User Manual

7.9

Sensors - Check status of the sensors

The "Sensors" entry provides you with pages which allow you to check the
statuses of sensors of the managed server:
– "Fans - Check fans" on page
– "Temperature - Report the temperature of the server components" on
page 215.
– "Voltages - Report voltage sensor information" on page
– "Power Supply - Check power supply" on page
– "Component Status - Check status of the server components" on page
To facilitate checking the status, the sensor status is not only shown in the form
of the current value, but also using a color code and a status icon:
Black (font color)/
Orange (font color)/
Red (font color)/
Table 6: Status of the sensors
iRMC S2/S3
Sensors - Check status of the sensors
212.
The measured value is within the normal operational
value range.
The measured value has exceeded the warning
threshold.
System operation is not yet jeopardized.
The measured value has exceeded the critical
threshold.
System operation may be jeopardized and there is a
risk of loss of data integrity.
217.
218.
220.
211