Macro Descriptions Usable In Manager; Softune Workbench - Fujitsu SOFTUNE User Manual

CHAPTER1 Basic Functions
1.11

Macro Descriptions Usable in Manager

This section explains the macro descriptions that can be used in the manager of

SOFTUNE Workbench.

■ Macros
SOFTUNE Workbench has special parameters indicating that any file name and tool-specific options are
specified as options.
The use of these parameters as tool options eliminates the need for options specified each time each tool is
started.
The type of macro that can be specified and macro expansion slightly vary depending on where to describe
macros. The macros usable for each function are detailed below. For the macros that can be specified for
"Error Jump" and "External Editors", refer to Sections "1.7 Error Jump Function" and "1.9 Storing
External Editors".
■ Macro List
The following is a list of macros that can be specified in SOFTUNE Workbench.
The macros usable for each function are listed below.
• External tools
• Customize build : Table 1.11-1 and Table 1.11-2
• Tool options
The directory symbol \ is added to the option directories in Table 1.11-1 but not to the macro directories in
Table 1.11-2 .
The sub-parameters in Table 1.11-3 can be specified in %(FILE), %(LOADMODULEFILE), %(PRJFILE)
and %(WSPFILE).
The sub-parameter is specified in the form of %(PRJFILE[PATH]).
If the current directory is on the same drive, the relative path is used. The current directory is the
workspace directory for %(PRJFILE), and %(WSPFILE), and the project directory for other than them.
18
: Table 1.11-1 and Table 1.11-2
: Table 1.11-2