Fujitsu Remote Management User Manual page 18

Functions of the iRMC S2/S3
– Local monitor-off support: It is possible to power down the local screen
of the managed PRIMERGY server during an AVR session in order to
prevent unauthorized persons from observing user input and actions
carried out on the local server screen during the AVR session.
– Low bandwidth
In the case of a reduced data transfer rate, you can configure a lower
bandwidth (bits per pixel, bpp) in terms of color depth for your current
AVR session.
Remote Storage
Remote Storage makes a "virtual" drive available which is physically located
on a remote workstation or made available centrally on the network using a
Remote Storage server.
The "virtual" drives available with Remote Storage are simply managed in
much the same way as local drives and offer the following options:
– Read and write data.
– Boot from Remote Storage.
– Install drivers and small applications.
– Update BIOS from remote workstation.
(BIOS update via USB)
Remote Storage supports the following device types to provide a "virtual
drive" on the remote workstation:
– CD ROM
– DVD ROM
– Memory stick
– Floppy image
– CD ISO image
– DVD ISO image
A Remote Storage server provides an ISO image centrally on the network in
the form of a "virtual drive".
Remote Storage permits either the simultaneous connection of up to two
"virtual" drives at the remote workstation or the provision of an ISO image
via a Remote Storage server.
18
iRMC S2/S3