User Permissions - Fujitsu Remote Management User Manual

User permissions

4.2 User permissions
The iRMC S2/S3 distinguishes between two mutually complementary types of
user permissions:
– Channel-specific privileges (via assignment to channel-specific permission
groups)
– Permissions to use special iRMC S2/S3 functions
I
The privileges and permissions required for the use of the individual
iRMC S2/S3 functions are described
– for the iRMC S2/S3-web interface, on
– for the Remote Manager, on
Channel-specific privileges (channel-specific permission groups)
The iRMC S2/S3 assigns each user identification to one of the following four
channel-specific permission groups:
– users
– Operator
– Administrator
– OEM
Since iRMC S2/S3 assigns these permissions on a channel-specific basis,
users can have different permissions, depending on whether they access the
iRMC S2/S3 over the LAN interface or the serial interface.
The scope of permissions granted increases from User (lowest permission level)
through Operator and Administrator up to OEM (highest permission level).
I
The permission groups correspond to the IPMI privilege level. Certain
permissions (e.g. for Power Management) are associated with these
groups or privilege levels.
68
page 138,
page 330.
iRMC S2/S3