Fujitsu Remote Management User Manual page 94

Using AVR
(3)
(1)
(2)
Press the Mouse Sync key
or
(1)
(1) Drag the local mouse cursor to the top left corner.
(2) The server's mouse pointer follows automatically.
(3) The mouse pointers are synchronized when they completely
overlap and e displayed as a single mouse pointer.
Figure 32: Synchronizing the local mouse pointer and the mouse pointer of the managed
server
I
Correct synchronization of the mouse pointers requires that certain
settings are made on the managed server. If the managed server has
been installed using the ServerView Installation Manager these settings
has been preconfigured automatically by the Matrox VGA installation.
If synchronization of the mouse pointers does not function correctly, for
instance because the preconfigured settings have been changed, you
can restore correct synchronization of the mouse pointers by making the
settings described below. The settings must be made on the managed
server.
94
iRMC S2/S3