Fujitsu Remote Management User Manual page 51

Mode
This setting affects the behavior of console redirection while the
operating system is running (after the POST phase has completed) -
see section "Using console redirection while the operating system is
running" on page
Standard
Console redirection is terminated after the BIOS POST phase.
Enhanced
Console redirection continues to be available after the BIOS
POST phase.
Ê Make the following settings in the TrustedCore setup utility:
Figure 12: Console Redirection menu (as it appears in the TrustedCore setup utility)
Com Port Address
Set the value to On-board COM A.
Baud Rate
Specify the baud rate.
Console Type
Leave this setting unchanged. (The setting depends on the terminal
type used.)
iRMC S2/S3
Configuring text console redirection via LAN
55:
51