Fujitsu Remote Management User Manual page 290

User Management
Permissions retrieved via LDAP
The authorization profile defined in the LDAP directory service
applies to the user.
I
The Permissions retrieved via LDAP option is only available, if LDAP
is enabled (see option
CAS User Privilege and Permissions
The CAS User Privilege and Permissions group allows you to define the
iRMC S2/S3 privilege and permissions a user is granted if they are logged in at
the iRMC S2/S3 via SSO.
I
The CAS User Privilege and Permissions group is not displayed if you have
selected Permissions retrieved via LDAP under Permissions assigned from in
the CAS Generic Configuration group.
Figure 174: CAS User Privilege and Permissions
Privilege
Assign a privilege group to the user here:
– User
– Operator
– Administrator
– OEM
Refer to section "User permissions" on page 68
permissions associated with the privilege groups.
In addition to the IPMI specific permissions, you can also individually assign
users the following channel-independent permissions:
Configure User Accounts
Permission to configure local user access data.
290
"LDAP Enabled" on page 274).
for information on the
iRMC S2/S3