Configuring And Using The Serial Interface Of The Irmc S2/S3 - Fujitsu Remote Management User Manual

Configuring and using the serial interface of the iRMC S2/S3

3.3 Configuring and using the serial interface
of the iRMC S2/S3
The serial interface of the iRMC S2/S3 offers you the following possibilities:
– You can use the terminal application Remote Manager (Serial) over a null
modem cable (see
on page 62).
– In the case of an iRMC S2, you can forward alerts via modem. You can
configure alerting via modem using the web interface of the iRMC S2 (see
section "Serial / Modem Alerting - Configure alerting via modem" on
page 255).
iRMC S2/S3
section "Using the Remote Manager (Serial) interface"
57