Testing The Lan Interface - Fujitsu Remote Management User Manual

Ê Configure the following settings:
Management LAN
Set the value to Enabled.
Management LAN Port
The Management setting is recommended.
I
For details on configuring the remaining settings see
"Network Settings - Configure the LAN parameters" on page 238
and/or refer to the manual "BIOS (Aptio) Setup Utility" manual
corresponding to your server.
Ê Save the settings.
Ê If you want to use console redirection on the iRMC S3, continue with
"Configuring text console redirection for the iRMC S3" on page
If you do not want to use text console redirection on the iRMC S3, exit the
UEFI setup and continue with the next
3.1.4

Testing the LAN interface

You can test the LAN interface as follows:
Ê Use a web browser to attempt to log into the iRMC S2/S3 web interface. If
no login prompt appears, it is probable that the LAN interface is not working.
Ê Test the connection to the iRMC S2/S3 with a ping command.
iRMC S2/S3
Configuring the LAN interface of the iRMC S2/S3
section "Testing the LAN
section
section
53.
interface".
47