Fujitsu Remote Management User Manual page 299

Ê Click Enter Console.
You are then connected to the console and can execute the required
command, either by entering it directly in the console area or by clicking it in
the Command drop-down list (IPMI commands only):
Enter SAC command directly.
(No confirmation prompt!)
Figure 181: Entering SAC or IPMI commands at the console.
IPMI command
Power On
Power Off
Reset
Power Cycle
Shutdown
Ê To close the connection to the console, click Leave Console.
iRMC S2/S3
Console Redirection - Redirecting the console
or
Select IPMI command and
click.
Explanation
Switches the server on.
Switches the server off.
Completely restarts the server (cold start), regardless of the status of
the operating system.
Powers the server down completely and then powers it up again after
approximately 5 seconds.
Graceful shutdown and power off.
A
AAA
299