Fujitsu Remote Management User Manual page 268

User Management
Privileges / Permissions - Assigning user privileges
The Privileges / Permissions group allows you to configure the channel-specific
user privileges.
Figure 154: User Management - User "<name>" Configuration page, Privilege / Permissions
LAN Channel Privilege
Assign a privilege group for a LAN channel to the user here:
– User
– Operator
– Administrator
– OEM
Refer to section "User permissions" on page 68
permissions associated with the privilege groups.
Serial Channel Privilege
Assign a privilege group for a serial channel to the user here: The same
privilege groups are available as for LAN Channel Privilege.
In addition to the channel-specific permissions, you can also individually assign
users the following channel-independent permissions:
Configure User Accounts
Permission to configure local user access data.
Configure iRMC S2/S3 Settings
Permission to configure the iRMC S2/S3 settings.
Video Redirection enabled
Permission to use Advanced Video Redirection (AVR) in "View Only" and
"Full Control" mode.
Remote Storage enabled
Permission to use the Remote Storage functionality.
268
for information on the
iRMC S2/S3