Specifying The Application In Scansnap Manager - Fujitsu PFU Rack2-Filer User Manual

Specifying the application in ScanSnap
Manager
This section describes how to enable the use of ScanSnap S1100/S1300/
S1500 by specifying the application in ScanSnap Manager.
• The following settings in the ScanSnap setup dialog box will
• If scanning with S1100/S1300/S1500, the following setting is
• It is recommended that you right-click the "ScanSnap
• When the operating system is Windows 7, clicking
be disabled.
- "Rename file after scanning" checkbox on the [Save] tab
- "Color high compression" in the [Color mode] setting on
the [Scanning] tab
recommended. On the [Scanning] tab, select the [Option]
button. Then on the [Read mode option] dialog box that
appears, uncheck the "Allow automatic image rotation"
checkbox.
on
Manager" icon
results".
taskbar displays the "ScanSnap Manager" icon.
the taskbar and uncheck "Show scanning
Rack2-Filer User's Guide
on the
| 67