Fujitsu Remote Management User Manual page 148

System Information - Information on the server
System Status
The status of the global error LED, the CSS LED and the identification LED are
shown under System Status. You can also switch the PRIMERGY identification
LED on and off.
Figure 67: System Overview page - System Status
Power LED
Power status of the server.
The following statuses are possible:
– On: "Power ON" (green)
– On: "Standby mode (green) with text "Suspend to RAM (Standby)".
– Off: "Power OFF" (orange)
Error LED
Informs about the server's Global Error LED:
Status Info
(iRMC S2/S3)
off
on
blinking
CSS LED
Informs about the server's CSS (Customer Self Service) LED:
Status Info
(iRMC S2/S3)
off
on
blinking
148
Global Error LED
on the Server
does not light up.
lights red.
flashes red.
CSS LED on the
Server
does not light up.
lights orange.
flashes orange.
Status of the servers
No critical event.
Prefailure event for a non CSS component.
Critical event.
Status of the server
The server is operational.
Prefailure event for a CSS component.
Defective CSS component.
iRMC S2/S3