Advertisement
IV. Maintenance
and
Storage
Keep all nuts, bolts and screws U_ht to be sure the
equipment is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before stodng in any enclo-
sure.
To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free ol
grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or deterio-
ration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.
When machine is to be parked, stored or left unat-
tended, lower the cutting means unless a positive
mechanical lock is used.
_lk
CAUTION: Always disconnect spad( plug wire and
place wire where it cannot contact spark plug In
order to prevent accidental starting when setting
up, transporting,
adjusting or making repairs.
4
Advertisement
