Table of Contents
Advertisement
9.4
Sewing process
9.4.1
Switching on
Buttonhole shape
9.4.2
Sequence mode and single-button mode
9.4.2.1 Selecting a sequence (sequence mode)
9.4.2.2 Selecting a buttonhole (single-buttonhole mode)
24
–
Turn on the main switch .
The Dürkopp Adler logo briefly appears..
–
The main screen appears.
–
Press the "RST" key on the operating panel.
The machine moves to the insertion position and is ready for
operation.
A sketch of the buttonhole to be sewn first appears in the left half of
the display.
Depending on the service-menu setting either sequence mode or
single-button mode is available.
After switch-on the top line in the display appears on a dark
background. The last sewing sequence used is selected.
Selecting a different sequence
–
Press OK.
Use the ñ and ò cursor keys to switch from one sequence to
–
another.
If single-button mode is set in the service menu, no sequence can be
activated.
After switch-on the top line in the display appears on a dark
background. The last buttonhole sewn is displayed.
Selecting other buttonholes
–
Press OK.
Use the ñ and ò cursor keys to switch from one buttonhole to
–
another.
Number of
buttonhole
sequence
Buttonhole
sequence
Rotation speed
buttonhole length
cut mode
Piece counter
Advertisement
Table of Contents
