Using Manual Mode - Duerkopp Adler 669 Premium Operating Instruction

50
5.4

Using Manual mode

Fig. 29: Parameters in manual mode
1.9
The following table shows the individual symbols of parameters
on the display and the functions of the buttons on the control panel.
For some parameters, the exact setting is described in more detail
later in the chapter.
The selected parameter is shown inverted on the control panel
display. When a parameter is changed, its new value is loaded
immediately.
Symbol Meaning
The button can be assigned various functions as required,
 p. 52.
• Press softkey button
Quick access function (softkey menu)
Press the softkey menu button,  p. 52.
Program number
Value range: 000 - 999
Program 000 indicates that the control is in "Manual mode".
• Use ◄/►to select the Program parameter
• Use ▲/▼ to change the program number or enter the
program number using the numeric buttons 0 – 9 and
confirm with the OK button
Stitch length
Value range: 00.0 – 9.0 [mm] (depending on the sewing
equipment or class)
• Use ◄/► to select the Stitch length parameter
• Use ▲/▼ to change the stitch length
Needle thread tension
Value range: 01 - 99
• Use ◄/► to select the Needle thread tension parameter
• Use ▲/▼ to change the needle thread tension
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
4.0 25 5 3.0
Programming
51