Calling Up The Technician Mode And Entering The Code; Main Menu Of The Technician Mode; Submenu Machine Configuration - Duerkopp Adler 540-100-1 Service Instructions Manual

3.

Calling up the technician mode and entering the code

4.

Main menu of the technician mode

No. Parameter name
T1 Machine
T2 User configuration
T3 Service

4.1 Submenu Machine configuration

No. Parameter name
T1.1 Parameter
T1.2 Soft start
T1.3 Equipment
T1.4 Thread monitor
T1.5 Condensed stitches
T1.7 Times
T1.8 Counter (totalizer) -
buttonholes ever sewn
In order to get into the technician mode a code has to be entered. For
this purpose please proceed as follows:
–
Press the F key in the sewing mode.
A window for entering the code appears.
–
Enter the technician code 25483.
Confirm with the OK key.
Note
If a wrong code has been entered, the automate returns to
the sewing mode.
Symbol
Symbol Range
-
-
-
-
-
-
0 ... 99,999,999
Description
Selection of the submenu for the machine
configuration
Selection of the submenu for the configuration
of the control elements
Selection of the submenu for test functions
Description
Selection of the submenu for
parameter setting
Selection of the submenu for soft
start setting
Selection of the submenu for
equipment definition
Selection of the submenu for thread
monitor options
Selection of the submenu for setting
of condensed stitches
Selection of the submenu for
entering machine times
Display of the counter of all
buttonholes ever sewn
The value cannot be selected or
edited.
3
7