Table of Contents
Advertisement
22
4.4
Inserting/changing the needle
CAUTION
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before you insert or
change the needle.
NOTICE
Property damage may occur!
There is a risk of machine damage, needle breakage or
thread breakage if the distance between needle and hook tip
is incorrect.
Check the distance to the hook tip after inserting a needle
with a different thickness.
4.4.1
In 1-needle machines
Fig. 4: Inserting/changing the needle
①
②
③
④
(1) - Needle bar
(2) - Screw
To change the needle in a 1-needle machine:
1.
Turn the handwheel until the needle bar (1) reaches the upper
end position.
2.
Loosen the screw (2).
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
(3) - Groove
(4) - Hook
Operation
Advertisement
Table of Contents
