Table of Contents
Advertisement
3.3
Changing the needle
12
3
Caution: danger of injury
The needle must be changed with the machine switched off or in the
"Safe Stop" position.
–
Undo screw 1.
–
Pull the needle 2 out of the needle bar.
–
Push the new needle as far as it will go into the hole in the needle
bar.
–
Align the needle 2 so that its throat points forward and the surface
3 on the needle piston to the left (in the direction of the attachment
screw 1).
–
Tighten screw 1.
1
2
Advertisement
Table of Contents
