Defining The Download Characters [Esc &] - Citizen CBM-262 II Command Reference Manual

Defining the download characters [ESC &]
[ASCII] ESC
[Decimal] 27
[Hexadecimal] 1B
[Parameter] s=3h (Font A, B)
0<n<7Eh
In case of Font A,
In case of Font B,
In case of Font C,
[Description]
Defines the download characters of alphabet, number and Kana.
"s" indicates the number of bytes in vertical direction.
"n" indicates the start character code and "m" indicates the end character code. To define only one character,
set n=m.
Definable character codes include 95 characters at maximum in the range of ASCII code (20h to 7Eh).
"a" indicates the number of dots in horizontal direction.
"pn" is the data to be defined, which indicates the pattern equal to "a" dots in horizontal direction from the
left end. The rest of pattern on the right side is filled with space.
Once download characters are defined, they remain valid until redefinition, execution of ESC "@" and GS "∗"
or power OFF is performed.
It is possible to check with the ESC "v" command whether download is being performed.
(Only in case of serial I/F)
CITIZEN
& s n m
38 s n m
26 s n m
2h (Font C)
20h<m<7Eh
0<a<0Ch
0<a<09h
0<a<08h
0<p1...pn<255
TITLE:
PB-32/33
a p1...pn
a p1...pn
a p1...pn
SHEET
REVISION
B
ESC &
14
14/85