Dle Dc4 Fn D1 - Citizen CT-S280 Command Reference Manual

DLE DC4 fn d1...d7 (Specification of fn = 8)
Support model
[Function] Buffer clear
[Code] <10>H<14>H<fn><d1> ...<d7>
[Range] fn=8, d1=1, d2=3, d3=20, d4=1, d5=6, d6=2, d7=8
[Outline] [The specification which is common to the model]
• Erases all data in receiving buffer or print buffer.
• Sends the following 3-byte data group.
Header
Identifier
NULL
• Enters the state of selecting STANDARD MODE.
[Caution] [The specification which is common to the model]
• When receiving a code rowcoinciding with the code configuring this command, the
same operation as this command takes place and attention bythe user is required.
Example: When corresponding code rowis present in bit image data.
• This command must not be used between other command code rows.
Example: This command is used in the bit image data.
• This command is ignored under the following conditions.
• During sending block data
CT-S280 CT-S300
CT-S310
CT-S281
Hex.
37H
25H
00H
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Decimal No. of Data
55
1 byte
37
1 byte
0
1 byte
- 331 -
BD2-2220 PMU series
CT-P29x series CT-S310 II