Printing On Glossy Paper - Xerox WorkCentre 7425 User Manual

Printing

Printing on Glossy Paper

For a listing of trays that support glossy paper, see
To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox
Supplies website for your printer: www.xerox.com/office/WC7425_WC7428_WC7435supplies.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the
tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
• In the printer driver, touch Gloss, Gloss Reloaded, Heavyweight Gloss or Heavyweight Gloss
Reloaded as the paper type, or choose the tray loaded with the desired paper.
See also:
Supported Media Sizes and Weights
Tray Media Compatibility
62 WorkCentre 7425/7428/7435
User Guide
Tray Media Compatibility
on page 48
on page 49
on page 49.