Stapling Copies; Folding Copies; Hole Punching Copies; Booklet Creation - Xerox WorkCentre 7425 User Manual

Stapling Copies

If your printer has a finisher with a stapler, copies can be automatically stapled.
To select stapling:
1. Touch Copy on the touch screen.
2. If the original is:
a. Collated: under Copy Output, touch Collated 1 Staple or Collated 2 Staples.
b. Uncollated: touch More or Hole Punch & More (Office LX Finisher and Professional Finisher),
then touch 1 Staple, 2 Staples, or 2 Staples Top. The screen shows the location of the staple
on the page.
c. Touch Save.

Folding Copies

If your printer has the Office LX Finisher, you can crease copies and then fold them manually. If you
have the Professional finisher, you can fold copies.
1. Touch Copy on the touch screen.
2. Touch Folding under Copy Output, then touch Single Fold.
3. Touch Fold a Page at a Time, or Fold as a Set.
4. When Fold as a Set is selected, the following options are available:
Staple on or off.
•
• Covers, with options for Blank Covers or 2-Sided Covers, and tray selection for cover pages and
main body paper. See
5. Touch Save.

Hole Punching Copies

If your printer has the Office LX Finisher with hole punch, or the Professional Finisher, copies can be
automatically hole punched.
1. Touch Copy on the touch screen.
2. Under Copy Output, touch Hole Punch & More.
3. Under Hole Punch, touch 2 Hole Punch or 3 Hole Punch.
4. Touch Top to punch at the top of the page rather than the left edge.

Booklet Creation

If your printer has the Office LX Finisher or Professional Finisher, copies can be formatted as a booklet.
The booklet can be folded, stapled or both. See
Including Covers on page 102 for more information.
Creating Booklets
Adjusting Copy Options
on page 101.
WorkCentre 7425/7428/7435
User Guide
93