Replacing The Transfer Roller - Xerox WorkCentre 7425 User Manual

Replacing the Transfer Roller

Caution: Do not perform this procedure when the printer is copying or printing.
1. Open Tray 5 (Bypass) (1). While lifting up the release lever, open the top left cover (2).
Warning: The fuser is hot during normal operation. To avoid potential personal injury, wait 40
minutes for the fuser to cool before proceeding.
2. Remove the new transfer roller from the packaging. Retain the packaging.
Replacing the Transfer Roller
wc74xx-01
wc74xx-206
WorkCentre 7425/7428/7435 173
User Guide