Installing The Driver (Windows 2000 Or Later) - Xerox WorkCentre 7425 User Manual

Installing the Driver (Windows 2000 or Later)

Preliminary Steps
Before installing a printer driver, verify that the printer is plugged in, turned on, and connected to an
active network.
Quick CD-ROM Install Steps
1. Insert the CD-ROM into your computer's CD-ROM drive. If the installer does not launch, do
the following:
• Click Start, then click Run.
• In the Run window, type: <CD drive>:\Setup.exe.
2. If you want to change the language, click the Language button, select the desired language from
the list, then click OK.
3. Click Install Drivers, then click Install Print and Scan Drivers.
4. Agree to the License Agreement.
5. Select your printer in the list of discovered printers, and click Install.
6. If your printer does not appear in the list of discovered printers:
a. Click the IP Address or DNS Name button near the top of the window.
b. Type the address or name of the desired printer, then click Search. (To see the IP address of the
printer, press the Machine Status button on the printer control panel. The IP address is
displayed on the left side of the touch screen.)
c. When the printer is displayed in the window, click Install.
7. Select the desired printer driver:
• PostScript
• PCL 5
• PCL 6
8. Select the desired scan driver:
• TWAIN
• WIA
• Enable Xerox Scan Utility
9. Follow the onscreen instructions.
See also:
Online Support Assistant at www.xerox.com/office/WC7425_WC7428_WC7435support
Installing the Printer Drivers
WorkCentre 7425/7428/7435
User Guide
39