3. Select from:
a. Copy Output: touch Paper Supply, Stapling, Collation and Output Destination/Offset
options, then touch Save.
b. Booklet Creation: See
c. Covers: See
Including Covers
d. Annotations: See
e. Segment Separators: To insert separator pages between segments, Select Segment
Separators, then choose from the following:
•
No Separators: separators are not inserted. Touch Save.
•
Blank Separators: blank separators are inserted. Use the arrows to specify the quantity of
separators. Touch Save.
•
1-Sided Separators Side 1 Only: the first page of the loaded documents is copied on the front
side of a separator. Touch Save.
1-Sided Separators Side 2 Only: the first page of the loaded documents is copied on the back
•
side of a separator. Touch Save.
•
2-Sided Separators: the first two pages of the loaded documents are copied onto each side of
a separator. Touch Save.
•
Watermarks (touch the shift arrow at the lower right hand corner of the touch screen to
display): See
Adding Watermarks
4. Touch Save.
Booklet Creation
on page 102. Select settings, then touch Save.
on page 102. Select settings, then touch Save.
Adding Annotations
on page 104. Select settings, then touch Save.
on page 93. Select settings, then touch Save.
WorkCentre 7425/7428/7435
Adjusting Copy Options
109
User Guide