Booklet Staple Replacement For The Professional Finisher - Xerox WorkCentre 7425 User Manual
Workcentre 7400 series
Hide thumbs
Also See for WorkCentre 7425:
- Ghid de utilizare (280 pages) ,
- Manual d'utilisation (276 pages) ,
- Quick use manual (88 pages)
Table of Contents
Advertisement
Maintenance
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
6. Grip the staple cartridge by the orange tabs and insert it into the staple cartridge unit until it clicks.
7. Close the finisher front door.
Booklet Staple Replacement for the Professional Finisher
Note:
The Professional Finisher uses two staple cartridges labeled R2 and R3. Booklet stapling
requires that both staple cartridges contain staples.
Warning:
Do not perform this procedure when the printer is copying or printing.
1. Open the finisher front door.
186
WorkCentre 7425/7428/7435
User Guide
wc74xx-091
wc74xx-102
wc74xx-103
Advertisement
Table of Contents
Troubleshooting
