Xerox WorkCentre 7425 User Manual page 89

4. Use the keypad on the right side of the control panel to enter the number of copies. The number of
copies selected appears in the upper-right corner of the touch screen.
• To correct the number of copies entered using the keypad, press the yellow Clear All button.
• To stop a copy job, press the red Stop button on the control panel. On the touch screen, touch
Resume to continue the job, or Cancel to cancel the job completely.
5. If necessary, change the copy settings. See
6. Press the green Start button on the control panel.
• When using the document feeder, copying continues until the document feeder is empty.
• When using the document glass for 2-Sided Copying, a message appears on the touch screen
when it is time to place the next original on the glass. Press the green Start button to copy the
next original.
Adjusting Copy Options
Basic Copying
on page 90.
WorkCentre 7425/7428/7435
User Guide
89